Jolly Mec FOGHEA, Инструкция по установке, использованию и обслуживанию

Страница: 38 / 48

38
2.5 FOGO air heating stove cladding assembly steps
The stove is supplied in two wooden crates on pallets, with the
boiler body and cladding to be assembled on the spot after
preparing and preassembling all the outside air intakes, the flue
and the electrical connections.
THE various parts of the cladding must be handled
with particular care, whether satin finished, polished or
painted, as they could be scratched or dented during
handling and assembly.
IT is advisable to handle the various parts of the cladding
without removing them from the original packing.
NOTE!
The flue must be installed in such a way that it can be
disassembled for possible cleaning or removing the cladding.
For better stove operation and efficiency it is advisable to
connect the hot air fan inlet pipe (pipe Ø120 mm) to the
outside, knocking out the precut sheet on the left side/rear
panel, located at the bottom, in the position indicated by the
arrow. Also, connect the combustion fan and Caldo Control
pipes to the cladding (as shown on page 39)