27
ENGLISH
Example of display message with the stove in
FLAME
STABILISATION MODE.
xxx
= FLAME
YYY = ON
Stove running mode
The WORK message informs the user that the stove is in “OPERATING MODE” i.e. it has reached the preset heating output level.
The stove operating level is set using buttons 5 or 6 and increasing or decreasing the value displayed on the first row with the same
status. There are 5 heat output levels.
The ambient temperature can be SET pressing buttons 1 or 2, which are also used to adjust the temperature to the desired value. The
stove remains in operating mode; i.e. at the heat output level, until the set ambient temperature is exceeded by 0.5°C, a condition required
to trigger the ECO function. To restart the heating mode, the ambient temperature must decrease to 1.0°C below the SET temperature.
The fan speed for the hot air exhausted through the grid depends on the output levels; the higher the output level, the faster the air will
be pumped through the front grid.
Example of display message with the stove in
RUNNING
mode
xxx
= WORK
Example of display message with the stove in
ECO
mode.
xxx
= ECO
YYY = MODULAT-
Example of display message when adjusting the
AMBIENT
TEMPERATURE SETTING.
xxx
= SET TEMP
YYY = ROOM
Example of display message when adjusting the
HEAT OUTPUT
SETTING
xxx
= SET
YYY = POWER
•
Display settings
The LCD Display is divided into 4 rows.
The first from the top, is the space designated to displaying the settings, time, temperature, output and operating parameters.
The second row indicates the ambient temperature with the set output level next to it.
The third and fourth row display stove operating messages, occupying both rows or just the fourth one, according to the length of the
message.
Example of display message with the stove
OFF
.
xxx
= OFF
Example of display message with the stove
ON
.
XXX =ON
10:30
25°C P3
XXX
YYY
10:30
25°C P3
XXX
10:30
25°C P3
XXX
YYY
21.0 °C
XXX
YYY
03
XXX
YYY
10:30
25°C P3
XXX
10:30
25°C P3
XXX