background image

15

ENGLISH

 

06.2 

RECOMMENDED FUELS

A pellet product’s performance is significantly linked and highly influenced by the type and quality of wooden pellets that is burned.  It is 

important to choose pellets that have no debris or impurities. The Association of Pellet Manufacturers with the Italian Thermotechnical 

Committee have established standards for identifying pellets in terms of energy*.

 As the efficiencies of different wooden  PELLETS qualities differ, likewise the efficiency and heat capacity emitted by the product running 

on pellets will vary. Similarly, unburned residue left in the combustion chamber is inversely proportionate to pellet quality: the lower the 

pellet purity, the faster dirt accumulates in the machine.

Jolly Mec Caminetti S.p.A strongly recommends the use of the same type of pellets used during first start-up, i.e. when the settings and 

calibrations were made to suit the loaded combustible materials. Continuous switching of types and qualities of combustible materials 

will require continuous adjustments to settings by the Technical Assistance Centre, which can not be endorsed by the Manufacturer.

The main quality certifications for PELLETS on the European market are 

DIN Plus

Ö-Norm M7135

 and 

UNI EN ISO 17225-2 

(class  A1  

or A2), which guarantee the following quality standards:

Store pellets at least 1 m from the appliance, in a dry place and not outdoors, not even under porches or roofings.

Do not use pellets that are very hard and with different dimensions; the mechanical parts are sized and tested for use with pellets with 

the above-mentioned characteristics.

No breakdown or malfunction depending on the quality of the pellets used and/or by the dosage of the quantity will be covered 

by the warranty.

PELLET QUALITY IS VERY IMPORTANT; PLEASE READ THIS SECTION CAREFULLY 

WARNING

*CERTIFIED PELLET CHARACTERISTICS

Powder 

1% maximum through a 3.2 mm screen

Apparent density 

680 Kg/m

3

 minimum

Dimensions

6 mm diameter from 25 to 30 mm of maximum length

Ash content 

1% maximum

Humidity

8% maximum

Heating power

4,9 kWh/Kg

Packaging

in eco-compatible or biodegradable material sacks

WHAT YOU SHOULD KNOW ABOUT PELLETS:

pellets are obtained by a drawing process using sawdust discarded by virgin wood processing systems and therefore 

have no chemical additives. The consistency, compactness and strength with which the pieces remain intact is due to a 

substance contained in wood called lignin; this acts as a binder during the compression phase. 
The various qualities of combustible materials can also depend on the sawdust mix used to produce the pellets, which 

generally have a standard length of between 5 and 30 mm, a diameter of between 5 and 6 mm, a weight of from 600 to 

700 Kg/m

3

 and a humidity of no more than 8% of its weight.

One advantage over wood is its greater heating power; in fact, when using good quality wood, it is possible to achieve 

about 4.3kWh/Kg with a humidity rate of up to 15%, whilst with pellets this can climb to 4.9kWh/Kg and a water content 

of a maximum of 8%.
The sacks of pellets must be stored in a clean, dry place.

NOTE

Содержание AMBRIA





















































Отзывы: