6
6i
Flanged Nuts
Flanged Nuts
i. Take four of the Flange Nuts and place one on the
end of each of the Hex Head Cap Screws. Secure
them loosely.
j. Then check the angle of the bracket along the
Slotted Holes and confirm that the Raptor is set at
the desired angle along the holes. Apply anti-seize to
the threads before tightening. Once set, tighten the
Flange Nuts with a 9/16” Box End or Socket Wrench.
Do not over-tighten. Tighten to 20 ft-lbs.
ITEM(S) NEEDED
#6 x 4
Minn Kota Consumer & Technical Service
Johnson Outdoors Marine Electronics, Inc.
PO Box 8129
Mankato, MN 56001
121 Power Drive
Mankato, MN 56001
Phone (800) 227-6433
Fax (800) 527-4464
minnkotamotors.com
©2020 Johnson Outdoors Marine Electronics, Inc.
All rights reserved.
Part #2354913
Rev B
06/20
ECN 40715
For warranty information, please visit
6j
