©2017 Johnson Level & Tool
17
Volume/Cube Measurement Mode
1. Press the button 2 times until the Volume/Cube mode icon ( )
displays near the top left of the LCD screen.
2. After selecting the desired unit of
measure and reference position, aim the
Laser Distance Meter so that the laser
dot is on the selected target to measure
the length.
3. Keep your position stable and press the button. The length
measurement will appear above the main display
4. Aim the Laser Distance Meter so that the laser dot is on the
selected target to measure the height.
5. Keep your position stable and press the button again. The
length and height measurements will appear above the main screen.
6. Aim the Laser Distance Meter so that the laser dot is on the
selected target to measure the width.
7. Keep your position stable and press the button again. The
height and width measurements will appear above the main screen,
and the calculated volume will appear on the main screen.
8. Press the button again to take your next Volume
measurement.
1746i-4_Manuals 6/5/17 1:38 PM Page 17
