©2017 Johnson Level & Tool
15
Length Measurement Mode – Single
1. After turning on the instrument, it will default to the Length mode.
If the mode has been changed and you wish to return to the Length
mode, press the button until the measuring mode icon on the
LCD screen disappears.
2. After selecting the desired unit of measure and reference position,
aim the Laser Distance Meter so that the laser dot is on the
selected target.
3. Keep your position stable and press the button.
4. The measurement will appear on the main display, and the laser
will turn off.
5. Press the button again to take your next Length measurement.
Length Measurement Mode – Continuous
1. After selecting the desired unit of measure and reference position,
aim the Laser Distance Meter so that the laser dot is on the
selected target.
2. Keep your position stable and press and hold the button.
The Laser Distance Meter will enter continuous length
measurement mode.
3. Move the instrument as necessary to the proper distance.
4. Press the button or button to pause the measurement.
The laser will turn off.
5. To exit the continuous mode and return to the single length
measurement mode, press the button while the tool is paused.
1746i-4_Manuals 6/5/17 1:38 PM Page 15
