©2017 Johnson Level & Tool
23
Stake-out Measurement Mode
The Stake-out mode is used when it is necessary to measure a
repeating distance interval, such as when installing fence posting
every 8 feet.
It is important to have the volume enabled when
using the stake-out mode, as the tool will beep to guide you to
the correct distance.
To use the stake-out mode:
1. Set your desired unit of measurement and measurement reference
position, as described earlier in this manual.
2. Press the button 7 times to enter the stake-out mode. The main
display will have a flashing symbol and will read 0.00,
with the hundredths decimal place flashing. This number
indicates your desired stake-out distance.
3. If you wish to increase or decrease the set stake-out distance by
hundredths of a decimal point (the flashing number), press the
button to increase the set stake-out distance or press the button
to decrease the stake-out distance.
4. If you wish to increase or decrease the set stake-out distance by
whole numbers, first press the button. The whole number on
the main display will begin flashing. Press the button to increase
the set stake-out distance or press the button to decrease the
stake-out distance.
5. Aim the Laser Distance Meter so that the laser dot is on the
selected target.
6. While keeping your position stable, press and hold the
button.
+
_
1746i-4_Manuals 6/5/17 1:38 PM Page 23
