©2017 Johnson Level & Tool
25
Digital Level Measurement Mode
The Digital Level measurement mode provides an
angle measurement.
This laser distance meter can be used as a digital level to measure a
vertical angle, shown above as “C.” There are many benefits to using
this mode. Over short distances, it can be used for spot checking level
of floors, countertops, etc. Over long distances, it can be used to
check the angle of rafters or the relative height of two walls, etc. by
using the laser beam as a reference.
To use the Digital Level measurement mode:
1. After selecting the desired reference position, press the button 8
times until the Digital Level mode icon ( ) displays at the left of
the LCD screen.
2. The angle will show in the main display and will update
continuously as you move the Laser Distance Meter.
1746i-4_Manuals 6/5/17 1:38 PM Page 25
