Johnson Controls York YCRL0200HE, Руководство по эксплуатации

Страница: 47 / 56

The table below shows the minimum, maximum and default values:
The table below details the real time error numbers and a description of each error:
1
-
43
Form 201.26.OI1(11/09)
DESCRIPTION MINIMUM MAXIMUM DEFAULT
De Modifier Address -1 41943 -1
De Modifier Offset -1 99 -1
BACNET API BACNET
P1 Manual Mac Address 0 127 1
1200 76800 4800
None Ignore None
P1 Stop Bits 1 2 1
Terminal Modbus Client API
P2 Manual Mac Address 0 127 1
1200 76800 1200
None Ignore None
P2 Stop Bits 1 2 1
P2 HW Select Bit RS232 RS485 RS232
Reset Real Time Error NO YES None
P2 Baud Rate
P2 Parity
None, Even, Odd, Ignore Selectable
None, Even, Odd, Ignore Selectable
P2 Protocol
TERMINAL, UNAVAIL, MODBUS IO, MODBUS SERVER, API, MODBUS CLIENT Selectable
P1 Parity
1200, 4800, 9600, 19200, 38400, 57600, 76800 Selectable
P1 Protocol
BACNET, API Selectable
P1 Baud Rate
1200, 4800, 9600, 19200, 38400, 57600, 76800 AUTO Selectable
ERROR NUMBER
(##)
DESCRIPTION
0 ALL OK
1 DATUM TYPE OK TEST FAILED
2 ENGLISH TEXT TOO LONG
3 FLOATING POINT EXCEPTION
4 GET PACKET FAILED
5 GET TYPE FAILED
6 INVALID UNIT CONVERSION
7 INVALID HARDWARE SELECTION
8 REAL TIME FAULT
9 SPANISH TEXT TOO LONG
10 THREAD EXITED
11 THREAD FAILED
12 THREAD STALLED
13 IO BOARD RESET
14 BRAM INVALID
15 BACNET SETUP FAILED