T600HCx-3 Single-Stage Thermostats Installation Instructions
9
Operation
Programming/Operating the T600HCx-3
Thermostat
Once the thermostat is configured via the Installer
Configuration Menu, its operating parameters can be
programmed via the Main User Menu. Access this
menu by pressing the
MENU
key during normal
thermostat operation. The Main User Menu contains
the basic operating features of the thermostat.
The Main User Menu also uses Auto Help, which is
displayed automatically in the menu when there is a
pause in programming activity. To exit Auto Help,
continue with the programming selection. When the
thermostat is in the Main User Menu and is left
unattended for 45 seconds, the menu reverts to the
Status Display Menu.
Follow the steps in Table 3 to program the thermostat.
Note:
Schedule Set and Clock Set are available only
on the T600HCP-3 thermostat.
Enabling Temporary Override Schedule
Note:
The Override Schedule function is available in
T600HCN-3 models only when DI1 or DI2 is configured
as remote NSB.
Note:
The Override Schedule prompt only appears
when in the Unoccupied (Unoccup) or Unoccupied
Hold (Unoccup hold) Mode.
The override schedule prompt only appears when the
thermostat is in the unoccupied state. This menu
selection gives the user the option of overriding the
unoccupied setpoints with the occupied setpoints for
the amount of time specified under the
TOccTime
parameter. See the
Configuring the T600HCx-3
Thermostat
section.
Note:
If DI1 or DI2 is configured to operate as a
remote override contact, this menu is disabled.
To override the unoccupied state while in the Main User
Menu:
1.
Press the
NO
key to all prompts until the Override
Schedule prompt appears. If the thermostat is in
the unoccupied state, this is the first prompt.
2.
Press the
YES
key to enable the temporary
override. The thermostat returns to the Status
Display Menu.
When scrolling through the Status Display Menu,
Override now appears for the schedule status
parameter.
Table 3: Programming the T600HCx-3 Thermostat
(Part 1 of 2)
Thermostat
Display
Description
Press the
MENU
key while in the
Status Display Menu to enter the
Main User Menu.
Overrides Unoccupied Setpoints
Only Appears if Thermostat is in
Unoccupied State
See the
Enabling Override Schedule
section.
Cancels Override mode.
Sets the Temperature Setpoints
See the
Entering Permanent
Temperature Setpoints
section.
Selects the System Mode Default:
Automatic (
auto
)
See the
Selecting the System Mode
section.
Selects the Fan Mode Default:
Automatic (
auto
) for T600HCN-3
Smart (
smart
) for T600HCP-3
See the
Selecting the Fan Mode
section.
RoomTemp
75.0
F
Override
schd Y/N
Cancel
ovrd Y/N
Temperat
set? Y/N
Sys mode
set? Y/N
Fan mode
set? Y/N
Sets the Occupied and Unoccupied
Time Periods
See the
Programming the Daily
Schedule – Two-Event
and
Programming the Daily Schedule –
Four-Event
sections.
Sets the Day and Time
See the
Setting the Day and Time
section.
Sets a Permanent Hold on the
Schedule or Resumes the Schedule
See the
Setting Schedule Hold
section.
Table 3: Programming the T600HCx-3 Thermostat
(Part 2 of 2)
Thermostat
Display
Description
Schedule
set? Y/N
Clock
set? Y/N
Schedule
hold? Y/N
