D-308495 PGP914 Rev.0
For information regarding the recycling of this product you must contact the
company from which you originally purchased it. If you are discarding this
product and not returning it for repair then you must ensure that it is returned
as identified by your supplier. This product is not to be thrown away with
everyday waste.
Directive 2012/19/EU Waste Electrical and Electronic Equipment.
designed to be installed by SERVICE PERSONS only; (SERVICE PERSON is defined as a person having
the appropriate technical training and experience necessary to be aware of hazards to which that
person may be exposed in performing a task and of measures to minimize the risks to that person
or other persons).
The PGP303 is powered by a CR2450 GP or Panasonic battery.
W.E.E.E
Product recycling declaration
About PGP914
The PGP914 is a microprocessor-controlled wireless digital PIR detector, with optional pet
immunity.
The device has the following features:
•
Fresnel and cylindrical lenses with uniform detection sensitivity throughout its operating
range, up to 12 meters (39 ft).
•
Target Specific
Imaging™
(TSI) technology is used for distinction between humans and pets
weighing up to 38 kg (85lb).
•
The advanced True Motion
Recognition™
algorithm (patented) distinguishes between the
true motion of an intruder and any other disturbances which may cause false alarms.
•
No vertical adjustment is needed.
•
Motion event counter determines whether one (high sensitivity) or two (low sensitivity)
consecutive motion events trigger an alarm.
•
Very low current consumption.
•
Microprocessor-controlled temperature compensation.
•
Front and back tamper protection.
•
Temperature sensing and reporting.
•
Remote firmware upgrade
Limited Warranty
Digital Security Controls warrants that for a period of 12 months from the date of purchase, the
product shall be free of defects in materials and workmanship under normal use and that in
fulfilment of any breach of such warranty, Digital Security Controls shall, at its option, repair or
replace the defective equipment upon return of the equipment to its repair depot. This warranty
applies only to defects in parts and workmanship and not to damage incurred in shipping or
handling, or damage due to causes beyond the control of Digital Security Controls such as
lightning, excessive voltage, mechanical shock, water damage, or damage arising out of abuse,
alteration or improper application of the equipment.
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and
all other warranties, whether expressed or implied and of all other obligations or liabilities on the
part of Digital Security Controls. Digital Security Controls neither assumes responsibility for, nor
PGP914 Wireless PIR Motion Detector Installation Guide
15
