background image

D-308495 PGP914 Rev.0

 

 

authorizes any other person purporting to act on its behalf to modify or to change this warranty, 
nor to assume for it any other warranty or liability concerning this product.

 

In no event shall Digital Security Controls be liable for any direct, indirect or consequential 
damages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in 
connection with the purchase, installation or operation or failure of this product.

 

Warning: 

Digital Security Controls recommends that the entire system be completely tested on a regular 

basis. However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical 
disruption, it is possible for this product to fail to perform as expected.

 

Important Information: 

Changes or modifications not expressly approved by Digital Security Controls 

could void the user’s authority to operate this

 equipment.

 

 

EULA

 

IMPORTANT READ CAREFULLY: DSC Software purchased with or without Products and Components 
is copyrighted and is purchased under the following license terms:

 

This End User License Agreement ("EULA") is a legal agreement between You (the company, 
individual or entity who acquired the Software and any related Hardware) and Digital Security 
Controls, a division of Tyco Safety Products Canada Ltd. ("DSC"), the manufacturer of the integrated 
security systems and the developer of the software and any related products or components 
("HARDWARE") which You acquired.

 

If the DSC software product ("SOFTWARE PRODUCT" or "SOFTWARE") is intended to be 
accompanied by HARDWARE, and is NOT accompanied by new HARDWARE, You may not use, copy 
or install the SOFTWARE PRODUCT. The SOFTWARE PRODUCT includes computer software, and may 
include associated media, printed materials, and "online" or electronic documentation.

 

Any software provided along with the SOFTWARE PRODUCT that is associated with a separate end 
user license agreement is licensed to You under the terms of that license agreement.

 

By installing, copying, downloading, storing, accessing or otherwise using the SOFTWARE 
PRODUCT, You agree unconditionally to be bound by the terms of this EULA, even if this EULA is 
deemed to be a modification of any previous arrangement or contract. If You do not agree to the 
terms of this EULA, DSC is unwilling to license the SOFTWARE PRODUCT to You, and You have no 
right to use it.

 

SOFTWARE PRODUCT LICENSE

 

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as 
well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

 

1.

 

GRANT OF LICENSE. This EULA grants You the following rights:

 

(a)

 

Software Installation and Use - For each license You acquire, You may have only one copy of the 

SOFTWARE PRODUCT installed.

 

(b)

 

Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run, 

shared or used concurrently on or from different computers, including a workstation, terminal or 
other digital electronic device ("Device"). In other words, if You have several workstations, You will 
have to acquire a license for each workstation where the SOFTWARE will be used.

 

(c)

 

Backup Copy - You may make back up copies of the SOFTWARE PRODUCT, but You may only 

have one copy per license installed at any given time. You may use the back up copy solely for 
archival purposes. Except as expressly provided in this EULA, You may not otherwise make copies of 
the SOFTWARE PRODUCT, including the printed materials accompanying the SOFTWARE.

 

2.

 

DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

 

(a)

 

Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse 

engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that 
such activity is expressly permitted by applicable law notwithstanding this limitation. You may not 
make any changes or modifications to the Software, without the written permission of an officer 
of DSC. You may not remove any proprietary notices, marks or labels from the Software Product.

 

 

16 

PGP914 Wireless PIR Motion Detector Installation Guide

 

Содержание PGP914



















Отзывы: