Johnson Controls CIW01 Скачать руководство пользователя страница 12

Страница: 12 / 52

P5415479

6. Operation Lock

•  This function is used to lock a setting.
•  The following functions are applicable.
  (a)  Operation Mode (MODE)

(b)  Temperature Setting (TEMP)
(c)  Fan Speed (SPEED)
(d)  Louver Swing Direction (LOUV.)

NOTE:
When “Lock function for operation mode
selection” is selected, the operation lock
performs the following procedures

4.3 Louver Swing Direction

(1) Press “ ” (On/Off).

Make sure that the power is ON. Press “ ”
or “ ” and select “LOUV.”.

NOTE:
For the indoor unit without the auto louver
mechanism, the indication of “LOUV.” is NOT
displayed on the LCD.

(2) By pressing “ ” or “ ”, the louver direction

changes as follows.

NOTES:
• The air

ow angle is different for each indoor

unit type. Check for detailed information in
“Swing Louver Direction” of each operation
manual for indoor unit.

• The louver position on the LCD and the actual

louver position may not match during the auto
swing operation.
To set the louver positions, set the angle after
checking the position on the LCD.

• The louver may NOT stop immediately after

the switch is pressed.

5. Operation

5.1 Operation

Start

Press “ ” (On/Off).
The run indicator turns on and the operation starts.

NOTE:
Temperature/Air Flow Setting
Temperature set-point and air

ow settings are

retained after the indoor unit is turned off at the
controller. If a setting change is required, refer
to Sections 3.1 to 4.3.

: Auto swing operation starts. At this time, the

louver swings repeatedly on the LCD.

Recommended

Angle

Auto-Swing

Recommended

Angle

Range

Angle

Range

LCD Indication

COOL, DRY HEAT, FAN

On/Off

NOTE:
The indoor unit fan may continue to operate for
up to two minutes following the heating cycle to
dissipate residual heat from the indoor unit.

5.2 Operation

Stop

Press “ ” (On/Off) again.
The run indicator is turned off and the operation
stops.

Back/Help

Содержание CIW01





















































Результаты поиска

Содержание CIW01

Отзывы:

Похожие инструкции для CIW01

Бренды по названию

Популярные бренды

Johnson Controls CIW01, Руководство по эксплуатации

Результаты поиска

Содержание CIW01

Отзывы:

Похожие инструкции для CIW01

Бренды по названию

Популярные бренды