John Bean BFH 1000, Руководство по эксплуатации

Страница: 37 / 46

Page 30
The proposal for the position of the wheels on
the car is given to reduce the pull as much as
possible. Should the operator want to posi-
tion the wheels in a way that the lowest vibra-
tion is achieved on the steering wheel he
presses the F6 button. See Figures 47and
48.
By doing this the 2 wheels with the lowest run
out are selected to be put to the front axle.
Press button F6 to change to a different pic-
torial that allows to switch back to selecting
for the lowest pull.
F2 allows to start a new set. Pressing the F2
button results in cancellation of all data for
wheels that have been stored to a set. See
Figure 49.
Pressing F1 will cancel the complete proce-
dure, DELETE all data that have already been
entered to the set of wheels so far and EXITS
OptiLine. See Figure 50.
When the “OptiLine” feature is disabled, to be
enabled again return to the “Optima” screen
and Select the “OptiLine” Feature as explained
earlier.
NOTE: Please note that the location of the
drivers seat can be set by a service code,
please contact your service representative for
more details. North American Default is Left
Side.
Figure 47
Figure 48
Figure 49 - “F2”
Figure 50
lowest run out
lowest pull
Cancel
Exit OptiLine