Jobsite CN-25, Оригинальная инструкция

Страница: 29 / 39

9. Maintenance
Before cleaning, inspecting or repairing your unit,
make sure that engine has stopped and is cool.
Disconnect the spark plug to prevent accidental
starting.
Follow the instructions to carry out regular
maintenance, pre-operating procedures and daily
maintenance routines. Improper maintenance may
result in serious damage to the machine.
Maintenance after each use
1. Air filter
Dust on the cleaner filter can be removed by
washing in a solution of household detergent and
warm water. To clean dirt in the meshes, remove
the cleaner cover and brush in gasoline. When
using compressed air, blow from the inside.
(1) air filter nut (2) air filter cover (3)
cleaner cover
2. Oiling sprayer
Dismount the guide bar and check the oiling outlet
for clogging.
(1) Oiling outlet
(2)
Oiling inlet
3. Guide bar
When the guide bar is dismounted, remove sawdust
in the bar groove and the oiling inlet.
Grease the nose sprocket from the feeding port on
the tip of the bar.