Jobsite CN-25, Оригинальная инструкция

Страница: 4 / 39

operating instructions only for the machine. A component of the intended use is also
the attention of the safety references, as well as the operating instructions in the
operating instructions. Persons, who serve the machine, must make themselves
trained and familiar with this product and think over all the possible dangers. Beyond
that the valid rules for the prevention of accidents are to be kept in every detail. Other
general rules within ranges according to industrial medicine and in terms of safety are
to be considered. Changes in the machine completely exclude an support of the
manufacturer and from it developing damage and lead to expiring the warranty. This
equipment is designed for use in home garden.
Remainder driven
Also when appropriate using the tool always remains a certain residual risk, which
cannot be excluded. From the kind and construction of the tool the following potential
endangerments can be derived:
- Contact with the unprotected sawing chain (cuts)
- Unexpected, sudden movement of the sawing sword (cuts)
- Damage of the ears, if no prescribed protection of the ears is carried
- Inhale from poisonous particle, exhaust gases of the combustion engine
- Contact of gasoline on the skin
- Noise. A degree of noise from the machine is not avoidable. Route noisy work is to
be licensed and limits for certain periods. Keep rest periods and they may need to
restrict the working hours to a minimum. For their personal protection and protection
of people working nearby, an appropriate hearing protection shall be worn;
- Vibration. Warning: The actual existing vibration emission value during use of the
machine can deviate from the manual or the manufacturer specified. This can be
caused by the following factors, before or during each of use should be considered:
- If the machine is used correctly
- If the method of cutting the material and how it is processed correctly.
- The use of the machine state is in the regulatory
- Sharpness condition of cutting tool or cutting tool real
- The grab handles are mounted back to optional vibration handles and are they fixed
to the machine body.
If you notice an unpleasant sensation or skin discoloration during use of the machine
on your hands once you stop working. Place an adequate work breaks. In disregard
of adequate work breaks, there may be a hand-arm vibration syndrome.