Joab EcoDrive Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 73

Joab EcoDrive Скачать руководство пользователя страница 47

39

Tipping a Body

The operator of the hook-lift is responsible for handling it. Care must be taken to
avoid injury or damage. Before operating the hook-lift make sure that you have read
and are fully aware of the warnings in this manual and on the hook-lift.

To tip a body follow the procedure listed below:

1.

Make sure that there is nobody within the working area of the vehicle and the body.

2.

Make sure that the vehicle is on a level and firm surface.

Failure to do so, can lead to the vehicle being unevenly loaded and tipping over. If the
vehicle leans two or more degrees there is a risk that it will tip over.

3.

If the vehicle has retractable axles, make
sure that they are lowered before tipping.

4.

Start the hydraulic pump. Once the pump is
started, the pump icon will be displayed in
the CBW controller as shown.

For information regarding the starting of the
pump, refer to

"User Interface", on page 12

.

EcoDrive manual: 13300 Edition 1 | 2019-01-31

«
...
45
46
47
48
49
...
»

Содержание EcoDrive










































































Отзывы:

Нет отзывов