Joab EcoDrive, Руководство по эксплуатации и обслуживанию

Страница: 12 / 73

LA-Model Hook-Lifts
LA-models are equipped with both a folding-hook-post (I) and a safety-hook (J), as shown
above.
The folding-hook-post is used to allow for low lifting angles. The hook-post can be moved
upwards and downwards as required to assist the loading/unloading of a body. It is operated
using the cab controller for the hook-lift.
The safety-hook is used to lock the hook onto the lifting bracket of a body and is operated from
the cab.
Optional Locking Mechanisms
JOAB's hook-lifts can be purchased with
optional body locking devices. These options
are in addition to the governing standards rel-
evant to each country.
For information regarding the relevant body
standard, refer to
"Body Standard", on page 7 .
An internal-mechanical lock or hydraulic lock
can be purchased as an option, as shown
opposite.
If a hook-lift with external hydraulic locking is
purchased, the body must have cut-outs in its frame, as shown. If the body does not have cut-
outs, it will not be secured during transport!
If a hook-lift with internal-mechanical locking is purchased, make sure that the locks engage the
body correctly. If they do not engage correctly, the body will be transported unsecured!
Manufacture Plate
All hook-lifts have a manufacture-plate located
on the front left-hand side of the subframe. The
information on the manufacture-plate must be
provided in the event of making a claim or when
ordering spare parts from JOAB.
4
About the Hook-Lift | Optional Locking Mechanisms
EcoDrive manual: 13300 Edition 1 | 2019-01-31