Joab EcoDrive, Руководство по эксплуатации и обслуживанию

Страница: 37 / 73

To select the desired function mode, simply press button 12 after start-up of the controller. By
default, Function mode_1 is operative at start-up. The LEDs next to buttons 11 and 12 indicate
which function mode is operative, see
Table 7 on page 28. If function mode 1 is active the LEDs
for buttons 11 and 12 are not illuminated.
Listed below is an overview of the buttons and their functions in relation to which function mode
has been selected.
Button Function_1 Setup Function_2 Setup Function_3
*
1 Tip - UP Trailer Tip - UP Front Plough - UP
*
2 Tip - DOWN Trailer Tip - DOWN Front Plough - DOWN
*
3 Extending Section - OUT Extra 1
*
Front Plough - LEFT*
4 Extending-Section - IN Extra 2
*
Front plough - RIGHT*
5
Folding hook post -
DOWN
Extra 3 Side Plough - UP
*
6 Folding hook post - UP Extra 4
*
Side Plough - DOWN
*
7 Hydraulic-lock - CLOSE Spreader hatch - trailer
*
Side Plough - IN
*
8 Hydraulic-lock - OPEN Extra 6
*
Side Plough - OUT
*
9 Spreader flap Start motor
*
Extra 7*
10 Automatic flap Stop motor
*
Extra 8
*
11 Safety-hook (LA models) -- --
12 Change function mode Change function mode Change function mode
Table 8: Radio controller functions for electrical operated systems
*Extra option. Not standard equipment.
Start the Radio Controller
To start the radio controller, follow the procedure listed below:
1. Make sure that the STOP button is pulled out.
2. Press and hold down buttons 11 and 12 simultaneously until a bleep is heard.
3. Verify that the display turn ON.
29
Radio Controllers | Operation
EcoDrive manual: 13300 Edition 1 | 2019-01-31