6
Allvis – Manual (EN 2021-05-25)
1.3 Liability
Important Notice!
Please read all instructions very carefully to fully understand
the correct handling of the Allvis measurement system and
vehicle dimension data.
The equipment is intended for use in the auto body shop
environment and in accordance with all recognized and
applicable safety rules and regulations.
Photos and drawings used throughout these instructions
depict the fundamental features and design of the product at
the time of publishing and do not reflect potential future
design changes.
Note
Measurements on Allvis data sheets reflect measured values
taken from vehicles after they leave the production line also
from information received from vehicle manufacturers and
great care has been taken to produce accurate and reliable
data.
Measurements on Allvis data sheets should be seen as
guideline values, since dimensions of vehicles of the same
model and year can vary as a result of manufacturing
tolerances or previous repairs, also as a result of
manufacturer’s subsequent design changes.
Allvis, JNE AB and its network of distributors, agents and
technical sales representatives directly or indirectly involved in
sales or technical support of the Allvis product line, cannot be
held responsible for damages or losses that may occur through
any data errors or lack of information on Allvis data sheets,
check lists or supplements to check lists, or for user internet
connection and computer related errors or malfunctions of
internet service providers.
No part of this publication or Allvis data sheets may be copied
in any form, or illegally stored in any computerized system
other than the unit covered by the Allvis subscription
agreement signed by the purchaser or user as authorized by
JNE AB.
Subject to alteration without notice.
