3
Allvis – Manual (EN 2021-05-25)
1 Introduction
1.1 General
Congratulations on your purchase of the Allvis vehicle
measuring system.
Allvis is an electronic measurement system intended for
measuring and checking dimensional accuracy of vehicle
unibody and frame.
The system consists of three main components:
•
Electronic measuring arm
•
Set of vehicle attachments and adaptors
•
Access to vehicle dimension database with customized
report print out features (optional)
These instructions contain a description of the equipment and
directions for its use, handling and maintenance.
Important!
Read the instructions carefully in order to fully understand the
correct handling of the Allvis measurement system and
measurement data.
The equipment is intended for use in the auto body shop
environment and in accordance with all recognized official
safety procedures.
Photos and drawings used throughout these instructions
depict the fundamental features and design of the product at
the time of publishing and do not reflect potential future
design changes.
Note!
Measurements on Allvis data sheets reflect measured values
taken from vehicles after they leave the production line also
from information received from vehicle manufacturers and
great care has been taken to produce accurate and reliable
data.
