15
Allvis – Manual (EN 2021-05-25)
3 Creating vehicle Dimension Data Sheets
This section describes how to install and use the Allvis
software.
3.1 General
Measurements on Allvis data sheets reflect measured values
taken from vehicles after they leave the production line also
from information received from vehicle manufacturers and
great care has been taken to produce accurate and reliable
data.
Measurements on Allvis data sheets should be seen as
guideline values, since dimensions of vehicles of the same
model and year can vary as a result of manufacturing
tolerances or previous repairs, also as a result of
manufacturer’s subsequent design changes.
When significant deviations are detected, or uncertainty about
accuracy of the data sheet compared to actual measurements
on the vehicle exist,
take the following action:
•
Check that the selected vehicle model year and type
are correct.
•
Check that the points measured have been correctly
identified and correspond to data sheet references.
•
Check that the correct height measuring attachments
and adaptors specified on the data sheet are being
used.
•
Check that the height calibration has been performed
according to instructions and to the specified
measurement point.
•
When in doubt, contact the distributor or the on-line
technical support.
