22
Allvis – Manual (EN 2021-05-25)
1.
Read the symmetry (cross) dimension between the
magnetic attachment and the measuring point to be
measured given on the data sheet.
2.
Read the height dimension given on the data sheet and
select a suitable height measuring rod and adaptor
(socket).
3.
Push the height measuring rod and adaptor into the
measuring arm and set it to the height dimension given
on the data sheet.
4.
Mount the magnetic attachment on the end of the
measuring arm. Pull out and adjust the measuring arm
so that the selected measurement point can be
reached.
(It can be advantageous here to use the hold feature to
freeze the measurement value, especially if it is difficult
to see the display while measuring. Press the
HOLD
button briefly to freeze the measurement value. To
return, press the
HOLD
button again briefly.)
5.
Read the measuring arm’s display and compare the
symmetry (cross) measurement value with the value
on the data sheet.
(It can be advantageous here to enter the measured
value in the data sheet table in order to create a before
or after report.)
Repeat the same procedure on the other side of the vehicle’s
corresponding and selected symmetry (cross) measurement
point.
Note that the vehicle can have different measurement values
for the right and left side, depending on the design of the
vehicle.
Magnet (Zero Point)
Socket
