JMP FOX 4000 H, Руководство по эксплуатации

Страница: 10 / 62

8
6. Technical data
6.1. Technical data
Carrying capacity:
4000 kg
Load distribution: max. 3:1 or 1:3 in or contrary to the drive direction
Raising time approx.: 35 sec
Lowering time approx.: 30 sec
Raising height: max.1990 mm
Operating voltage: 3 x 400 V, 50 Hz
Control voltage: 24 V
Motor power: 3 kW
Motor speed: 2800 rpm
Pump capacity: 12 l/min
Operating pressure approx.: 180 bar
Pressure relief valve approx.: 200 bar
Oil tank filling capacity approx.: 15 litres
On-site electric power supply: 3PH/N+PE, 400V, 50Hz 16 Amp. slow blow
Sound pressure level (measured at control element):
≤
75 dB(A)
Dead weight: 746 kg
Colour RAL: 7016
6.2. Safety equipment
-
Support arm locking system
Protection of support arms against unintentional movement (of support arms).
-
Synchronisation cables
Protection against uneven loading.
-
Main switch
Protection against unauthorised use.
-
Foot deflectors on support arms
Protection against crushing in foot area.
-
“Up Off” lift limitation
Protection against raising too far.
-
Pushbuttons
The lift stops the lifting movement when the buttons are released.
-
Safety catches
Protection against unintended lowering of the load if the cylinder system or a suspension
cable is defective. Press “Lock” following the lifting procedure.
-
Opening of the overflow valve in event of overloading.