JMP FOX 4000 H, Руководство по эксплуатации

Страница: 4 / 62

2
Organisational measures
-
Keep the operating instructions at the location of use at all times and ensure they are accessible.
-
In addition to the operating instructions, instruction must be provided on generally valid statutory and other
binding rules for the prevention of accidents and environmental protection, and these must be observed.
-
The awareness of safety and hazards exercised by personnel during work must be checked at least occasio-
nally, taking the operating instructions into consideration.
-
Use personal protective equipment insofar as necessary or demanded by regulations.
-
All safety and hazard instructions on the plant must be maintained in a legible condition.
-
Spare parts must conform to the technical requirements defined by the manufacturer. Contact the Matthies
workshop service if necessary.
-
Prescribed deadlines or deadlines indicated in the operating instructions for recurring testing/inspections must
be observed.
Maintenance tasks, troubleshooting
Observe all configuration, adjustment, maintenance and inspection tasks prescribed in the operating instruc-
tions and inspection deadlines, including all information relating to the replacement of parts and equipment!
These tasks may only be realised by competent persons who have participated in special in-house training
for this purpose. Warranty and liability Our “General Terms & Conditions of Sale & Delivery” apply in all cases.
Warranty and liability claims relating to injury and damage are excluded if they can be traced back to one
or more of the following causes:
-
Improper use of the plant.
-
Improper installation, commissioning, operation and maintenance of the plant.
-
Work realised without acceptance for initial commissioning by a competent person.
-
A failure to conduct recurring testing/inspections by a competent person.
-
Operation of the plant with defective safety equipment or improperly fitted or non-functional safety and protec-
tive devices.
-
A failure to observe instructions in the operating instructions regarding transportation, storage, installation,
commissioning, operation, maintenance and set up of the plant.
-
Unilateral structural changes to the plant.
-
Unilateral modifications of the lift (e.g. drive conditions: performance, speed, etc.)
-
Improperly realised repairs.
-
Disasters resulting from third-party interventions and force majeure.