JLG Toucan 12E, Руководство по эксплуатации и безопасности

Страница: 59 / 136

SECTION 4 – MACHINE OPERATION
31210162 – JLG Lift – 4-5
4.3 OPERATION
1. At ground control station, position the key-select switch
to PLATFORM.
2. Position the emergency stop switch to the on (out) posi-
tion by turning it clockwise.
3. At platform control station, position the emergency stop
switch to the on (out) position by turning it clockwise.
NOTE: If at any time during operation, the machine remains idle
for a period exceeding 2 hours, machine power will be
shut down. The emergency stop switch(es) must be recy-
cled to start machine again.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CON-
TROL LEVERS OR SWITCHES CONTROLLING THE PLATFORM MOVE-
MENT DOES NOT RETURN TO THE OFF OR NEUTRAL POSITION WHEN
RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN CONTROL LEVER OR THE
ENABLE BUTTON/TRIGGER SWITCH IS RELEASED, USE THE EMER-
GENCY STOP SWITCH TO STOP THE MACHINE.
4.4 STEERING AND TRAVELLING (DRIVING)
DO NOT DRIVE WITH MAST OUT OF TRANSPORT (STOWED) POSITION
EXCEPT ON A SMOOTH, FIRM AND LEVEL SURFACE FREE OF
OBSTRUCTIONS AND HOLES.
TO AVOID LOSS OF TRAVEL CONTROL OR "TIP OVER", DO NOT DRIVE
MACHINE ON GRADES OR SIDE SLOPES EXCEEDING THOSE SPECIFIED
IN SECTION 6.
USE EXTREME CAUTION WHEN DRIVING IN REVERSE AND AT ALL
TIMES WHEN THE PLATFORM IS ELEVATED.
BEFORE DRIVING, LOCATE THE BLACK/WHITE ORIENTATION ARROWS
ON BOTH THE CHASSIS AND THE PLATFORM CONTROLS. MOVE THE
DRIVE CONTROLS IN A DIRECTION MATCHING THE DIRECTIONAL
ARROW FOR THE INTENDED DIRECTION OF TRAVEL.