JLG Toucan 12E, Руководство по эксплуатации и безопасности

Страница: 26 / 136

SECTION 2 – USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-4 – JLG Lift – 31210162
Pre-Start Inspection
The Pre-Start Inspection must include each of the following:
1. Cleanliness – Check all surfaces for leakage (oil or bat-
tery fluid) or foreign objects. Report any leakage to the
proper maintenance personnel.
2. Structure – Inspect the machine structure for dents,
damage, weld or parent metal cracks or other discrep-
ancies.
3. Decals and Placards – Check all for cleanliness and
legibility. Make sure none of the decals and placards are
missing. Make sure all illegible and missing decals and
placards are cleaned or replaced.
4. Operation and Safety Manuals – Make sure a copy of
the Operator and Safety manual, AEM Safety Manual
(ANSI markets only), and ANSI Manual of Responsibili-
ties (ANSI markets only) is enclosed in the weather
resistant storage container.
5. “Walk-Around” Inspection – Refer to Figure 2-1.
6. Battery – Charge as required.
7. Hydraulic Oil – Check the hydraulic oil level in the reser-
voir. Ensure hydraulic oil is added as required.
8. Accessories/Attachments - Reference the Operator
and Safety Manual of each attachment or accessory
installed upon the machine for specific inspection, oper-
ation, and maintenance instructions.
9. Function Check – Once the “Walk-Around” Inspection
is complete, perform a functional check of all systems in
an area free of overhead and ground level obstructions.
Refer to Section 4 for more specific operating instruc-
tions.
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE
MACHINE IMMEDIATELY! REPORT THE PROBLEM TO THE PROPER
MAINTENANCE PERSONNEL. DO NOT OPERATE THE MACHINE UNTIL IT
IS DECLARED SAFE FOR OPERATION.