JLG 100HX Скачать руководство пользователя страница 54

Страница: 54 / 80

SECTION 3 - USER RESPONSIBILITIES AND MACHINE CONTROL

3-22

– JLG Lift –

3120889

THIS MACHINE IS NOT ELECTRICALLY
INSULATED.

BEWARE LIVE ELECTRICAL
CONDUCTORS. CONTACT
LOCAL ELECTRICITY
AUTHORITIES TO ENSURE
ADEQUATE CLEARANCES.

1. CHECK TYRES - PRESSURE AND CONDITION.

2. CHECK BOOM AND AXLE CUT-OUT SWITCHES.

3. CHECK SAFETY BELTS.

4. CHECK ALL OPERATIONS FOR MALFUNCTION.

5. CHECK BRAKES

6. CHECK OPERATORS HANDBOOK IS WITH MACHINE.

7. DO NOT OPERATE MALFUNCTIONING MACHINE.

8. CHECK ENGINE AND DRIVE SPEED CUT-OUT SWITCHES.

9. MAXIMUM OPERATING SLOPE: 3°

DAILY CHECK LIST

THIS MACHINE MUST ONLY BE
OPERATED BY TRAINED PERSONNEL.

REFERENCES SHOULD BE MADE TO THE
OPERATORS HANDBOOK TO ENSURE
SAFE OPERATION OF THE MACHINE.

CAUTION

1690696

MAX. : 12.5 m/s

MAX FORCE= 400N

2 P 70KG

SWL= 230KG

THIS MACHINE MUST ONLY BE
OPERATED BY TRAINED PERSONNEL.

REFERENCES SHOULD BE MADE TO THE
OPERATORS HANDBOOK TO ENSURE
SAFE OPERATION OF THE MACHINE.

THIS MACHINE IS NOT ELECTRICALLY
INSULATED.

BEWARE LIVE ELECTRICAL
CONDUCTORS. CONTACT
LOCAL ELECTRICITY
AUTHORITIES TO ENSURE
ADEQUATE CLEARANCES.

1. CHECK TYRES - PRESSURE AND CONDITION.

2. CHECK BOOM AND AXLE CUT-OUT SWITCHES.

3. CHECK SAFETY BELTS.

4. CHECK ALL OPERATIONS FOR MALFUNCTION.

5. CHECK BRAKES

6. CHECK OPERATORS HANDBOOK IS WITH MACHINE.

7. DO NOT OPERATE MALFUNCTIONING MACHINE.

8. CHECK ENGINE AND DRIVE SPEED CUT-OUT SWITCHES.

9. MAXIMUM OPERATING SLOPE: 3°

DAILY CHECK LIST

CAUTION

1691483

1701518

P/N 1691483 C

P/N 1690696 C

P/N 1701518

P/N 1690697 B

Courtesy of Crane.Market

Содержание 100HX

















































































Результаты поиска

Содержание 100HX

Отзывы:

Бренды по названию

Популярные бренды

JLG 100HX, Операторы и безопасность

Результаты поиска

Содержание 100HX

Отзывы:

Бренды по названию

Популярные бренды