JLG 100HX страница 17 Скачать руководство пользователя

Страница: 17 / 80

SECTION 1 - SAFETY PRECAUTIONS

3120889

– JLG Lift –

1-7

• ENSURE MACHINE IS POSITIONED ON A FIRM,

LEVEL AND UNIFORM SUPPORTING SURFACE
BEFORE RAISING OR EXTENDING BOOM.

• CHECK CLEARANCES ABOVE, ON SIDES AND BOT-

TOM OF PLATFORM WHEN RAISING, LOWERING,
SWINGING, AND TELESCOPING BOOM.

• EXERCISE EXTREME CAUTION AT ALL TIMES TO

PREVENT OBSTACLES FROM STRIKING OR INTER-

FERING WITH OPERATING CONTROLS AND PER-
SONS IN PLATFORM.

• ENSURE THAT OPERATORS OF OTHER OVERHEAD

AND FLOOR MACHINES ARE AWARE OF THE AERIAL
PLATFORMS PRESENCE. DISCONNECT POWER TO
OVERHEAD CRANES. POSITION BARRICADES ON
FLOOR IF NECESSARY.

• NEVER "SLAM" A CONTROL SWITCH OR LEVER

THROUGH NEUTRAL TO THE OPPOSITE DIRECTION.
ALWAYS RETURN SWITCH TO NEUTRAL AND STOP;
THEN MOVE SWITCH TO THE DESIRED POSITION.
OPERATE LEVERS WITH SLOW, EVEN PRESSURE.

• DO NOT CARRY MATERIALS ON PLATFORM RAILING

UNLESS APPROVED BY JLG INDUSTRIES INC.

• NEVER PUSH OR PULL THE MACHINE OR OTHER

OBJECTS BY TELESCOPING THE BOOM.

• NEVER USE BOOM FOR ANY PURPOSE OTHER

THAN POSITIONING PERSONNEL, THEIR TOOLS
AND EQUIPMENT.

• NEVER EXCEED MANUFACTURERS RATED PLAT-

FORM CAPACITY - REFER TO CAPACITY DECAL ON
MACHINE. DISTRIBUTE LOADS EVENLY ON PLAT-
FORM FLOOR.

• NEVER OPERATE A MALFUNCTIONING MACHINE. IF

A M ALFUN CTIO N O CCURS, SH UT DOWN TH E
M ACH IN E, RED TAG IT, AN D N OTIFY PRO PER
AUTHORITIES.

• DO NOT REMOVE, MODIFY, OR DISABLE FOOT-

SWITCH BY BLOCKING OR ANY OTHER MEANS.

• DO NOT ASSIST A STUCK OR DISABLED MACHINE

BY PUSHING OR PULLING EXCEPT BY PULLING AT
CHASSIS TIE-DOWN LUGS.

• NEVER ATTEMPT USING BOOM AS A CRANE.

STRUCTURAL DAMAGE OR TIPPING MAY OCCUR.

• STOW BOOM AND SHUT OFF ALL POWER BEFORE

LEAVING MACHINE.

• NO STUNT DRIVING OR HORSEPLAY IS PERMITTED.

Courtesy of Crane.Market

Содержание 100HX

















































































Результаты поиска

Содержание 100HX

Отзывы:

Похожие инструкции для 100HX

Бренды по названию

Популярные бренды

JLG 100HX, Операторы и безопасность

Результаты поиска

Содержание 100HX

Отзывы:

Похожие инструкции для 100HX

Бренды по названию

Популярные бренды