JLG 100HX Скачать руководство пользователя

Страница: 13 / 80

SECTION 1 - SAFETY PRECAUTIONS

3120889

– JLG Lift –

1-3

• AN OPERATOR MUST NOT ACCEPT OPERATING

RESPONSIBILITIES UNTIL ADEQUATE TRAINING HAS
BEEN GIVEN BY COMPETENT AND AUTHORIZED
PERSONS.

• BEFORE OPERATION, CHECK WORK AREA FOR

OVERHEAD ELECTRIC LINES, MACHINE TRAFFIC
SUCH AS BRIDGE CRANES, HIGHWAY, RAILWAY AND
CONSTRUCTION EQUIPMENT.

• PRECAUTIONS TO AVOID ALL KNOWN HAZARDS IN

THE WORK AREA MUST BE TAKEN BY THE OPERA-
TOR AND HIS SUPERVISOR BEFORE STARTING THE
WORK.

• DO NOT OPERATE THIS MACHINE UNLESS IT HAS

BEEN SERVICED AND MAINTAINED ACCORDING TO
THE M ANUFACTURERS SPECIFICATIONS AND
SCHEDULE.

• ENSURE DAILY INSPECTION AND FUNCTION CHECK

IS PERFORMED PRIOR TO PLACING MACHINE INTO
OPERATION.

• NEVER DISABLE OR MODIFY THE FOOTSWITCH OR

ANY OTHER SAFETY DEVICE. UNAUTHORIZED MOD-
IFICATION OF THE MACHINE IS A SAFETY VIOLA-
TION.

• DO NOT OPERATE MACHINE WHEN WIND CONDI-

TIONS EXCEED 12.5 M/S (30MPH).

• NEVER OPERATE BOOM FUNCTIONS (TELE, SWING,

LIFT) WHEN MACHINE IS ON A TRUCK, OTHER VEHI-
CLE, OR ABOVE GROUND STRUCTURE.

• THIS MACHINE CAN BE OPERATED IN NOMINAL

AMBIENT TEMPERATURES OF -20° C TO 40° C (0° F
TO 104°F). CONSULT FACTORY TO OPTIMIZE
OPERATION OUTSIDE THIS RANGE.

• APPROVED HEAD GEAR MUST BE WORN BY ALL

OPERATING AND GROUND PERSONNEL.

Courtesy of Crane.Market

Содержание 100HX

















































































Результаты поиска

Содержание 100HX

Отзывы:

Похожие инструкции для 100HX

Бренды по названию

Популярные бренды

JLG 100HX, Операторы и безопасность

Результаты поиска

Содержание 100HX

Отзывы:

Похожие инструкции для 100HX

Бренды по названию

Популярные бренды