20
Commands
23.
Ply All Clips
This allows the automatic playback of valid and enabled cues,
starting with the currently selected one. When a blank cue is
reached, the operation ends. A blank cue is defined as a cue
with a stop time = 00:00:00:00, which is the internal condition
of erased cues.
You must be in Cue/Play/Stop or CuePlyStp
Slo modes for this operation to take place!
After each cue is
played, the controlled unit will stop for a period set by the Cue
Delay Time, and then proceed to the next cue.
•
ENTER
When the ENTER key is pressed to initiate this
command, a second message appears telling the
operator to place the destination deck into record,
then press ENTER again to begin.
•
W1 or W2
By selecting the W1 or W2 button to be "Tog Clip
Enable", it is possible.
•
CLR/ESC
Pressing the CLR/ESC button at any time aborts the
operation.
24.
Ply Odet Clips
This the same as Play All Cues, except that it uses the Odetics
protocol to accomplish the playback. All other description of
Play All Cues is valid.
25.
Xmit Cue List
Pressing the ENTER key causes all non zero cue location data
to be sent over port #4 to either another ES-SloMo unit or a
computer. When attaching to another ES-SloMo unit, a
special RS-422A crossover cable is necessary. When attaching
to a computer, as RS-422A port or RS-422A to RS-232
converter is necessary.
