33
Machine Control
Any combination of four machines may be controlled by the ES-
SloMo. The four buttons labeled "Machine Control" indicate and
modify the machines that will receive commands. Pressing a single
button will switch both the output of the ES-SloMo and the tally
back to it to the selected machine. If more than one button are held
down, all units will receive commands from the ES-SloMo. In
this case, the first one pushed will become the machine used for
Tally operations (current time code, transport control LEDs, and
Edit Presets.) In a multi-machine operation, the selection of tally
machine made during the output select process may be overridden
by holding down the Rec/Shift button, then selecting a machine.
As soon as the Rec/Shift button is held, the current tally machine
will be displayed.
Upon power-up, the unit will always start with machine #1
selected unless the menu item
Mach 1 Control
is set to Disabled.
In that case, the ES-SloMo will start up with machine #2 selected.
