background image

 

17

16. 

Show Shut Spd

 

Enables or disables display of the Shuttle speed in the display 
window.

 

• 

Disabled 

• 

Enabled 
 

17. 

Log Operation

 

Enables or disables Log Operation.  
(See Log Operation in appendix)

 

• 

Disabled 

• 

Enabled 
 

18. 

Cue Operation

 

This determines how cues are stored and played back and the 
definition of a cue. 

• 

Cue and Park

 

Cues are only defined a start time. When a cue is 
recalled, a CueUp message is sent to unit and no further 
action is taken.  Cue start times are captured using the 
Store Cue button.  This mode allows 1000 cues. 
 

• 

Cue/Ply/Stop 
Cues are stored as start and stop times. When a cue is 
recalled, a CueUp message is sent.  When the unit 
reports that it is cued, a Play command is issued.  When 
the play time agrees with the stop time, a Stop 
command is issued.  Cues are captured using the Mark 
In/Out keys, along with the ENTER key.  This mode 
allows 400 cues composed of start and stop times. 
 

• 

CuePlyStopSlo 
Intended primarily for Sports. Like the operation above, 
except that when the cue is captured, the present setting 
of   the TBAR is saved as a SloMo setting. This may be 
done without the TBAR actually affecting the speed of 
playback at the time the capture takes place.  When a 
cue is recalled, this SloMo speed setting will be used 

Содержание ES-SloMo
















































Отзывы: