39
This indicates that Ports 1 and 6 are enabled for output that is,
commands from the ES-SloMo will be sent to decks connected to
Ports 1 & 6.
Similarly, to disable Port 1 in the above example, press 0, 1. The
display will show similar to the screen shot below and the
Gangway will now only illuminate button6.
To enable Port 12 in the above example, press 1, 2. The display
will show similar to the screen shot below.
To enable all the ports on the Gangway16 for output, press the All
On button. The display will show:
To disable all the ports on the Gangway16 for output, press the All
Off button. The display will show:
To receive data (such as Timecode or Status) back from the deck, a
port for Tally operation must be selected. This can be done by
pressing the Tally button. Pressing Tally will illuminate the Tally
LED and cause the display to show the following:
s
ss
ssssssssssssssss
r
