Protect Your Hearing!
We value you as a long-term customer. For that reason, we urge you to practice
restraint in the operation of this product so as to not damage your hearing and
that of others in your vehicle. Studies have shown that continuous exposure to high
sound pressure level can lead to permanent (irreparable) hearing loss. Mobile sound
systems are capable of producing such high sound pressure levels. Please limit your
continuous exposure at high volumes. While driving, operate your audio system in a
manner that still allows you to hear necessary noises to operate your vehicle/vessel
safely (horns, sirens, etc.).
FCC Compliance Statement
This equipment has been tested and found to comply with the limits of Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient of relocate the receiving antenna.
- Increase separation between the equipment ad the receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Safety Considerations
• Install this product in a dry, well-ventilated location that does not interfere
with your factory-installed systems. If a dry environment is not available, a location
that is not exposed to heavy splashing may be used.
• While this product is designed to be water-resistant, it should never be submerged
under water or subjected to high-pressure water spray.
• Do not mount this product in an engine compartment or areas of extreme heat.
Areas exposed to a heater or hot air should also be avoided.
• Securely mount this product so that it does not come loose in the event of a
collision, sudden jolt or as a result of repeated vibrations during normal use.
• Check before drilling to make sure that you will not be drilling into an exterior
panel/hull, fuel tank, gas/brake line, wiring harness or other vital system.
• Do not run system wiring outside or underneath the vehicle/vessel. This is an
extremely dangerous practice, which can result in severe damage/injury.
• Protect all system wires from sharp edges and wear by carefully routing them, tying
them down and using grommets and loom where appropriate. Secure all wiring
using cable ties or wire clamps, as needed.
• Do not replace the power wire fuse with one of a different value.
Never bypass the fuse.
• Never make power connections with a “live” wire. Failure to make safe, tight,
high-integrity connections can result in fire and extensive damage.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try correct the interference by one or more of the following
measures:
Содержание MediaMaster 100s
Страница 6: ...0 0 UHFHLYHU RQO 17...
