JL Audio MediaMaster 100s, Руководство пользователя

Страница: 8 / 15

Audio Zones continued...
Access the Audio Zone Setup menu to configure the functionality of each zone.
1. Press and hold SETTINGS to access the System Settings: Main Menu .
2. Press to select Audio Zone Setup .
3. Use to make selections.
Refer to the table and info below for each zone’s available setting and functionality.
Zone Menu Setting 1 Setting 2
Zone 1 (MAIN) Primary Audio Zone Start up Volume
Zone 2
Level Control Mode
Full-Range Relative
Full-Range Absolute Start up Volume
Off
Tone Control Mode
Same as Main Zone
Independent Tone Control
Zone 3 / Subwoofer
Level Control Mode
Subwoofer Relative*
Full-Range Relative
Full-Range Absolute Start up Volume
Off
Tone Control Mode
Same as Main Zone
Independent Tone Control
Zone 4 (Fixed Level) Selectable output voltage (4V, 2V, 1V or Off )
* Renames the zone to “Subwoofer” in the Audio Zone Levels menu and displays it after Zone 1.
Level Control Mode Settings
• Start up Volume: This setting adjusts the initial output level when the unit is turned
on and is useful in preventing unexpected output bursts.
•
Full-Range Relative: The level of this output will proportionally track Zone 1’s
volume. Press and hold to access the Audio Zone Levels menu
from the
Now Playing Screen to
adjust the level of volume offset by using and.
• Full-Range Absolute: The level of this output is independent with its own
Start up Volume. You may access its separate volume slider by using to
access the Audio Zone Levels menus.
Tone Control Mode Settings
• Same as Main Zone: The tone controls are assigned to Zone 1.
• Independent Tone Controls: The tone controls are separated with independent
controls. Press while in the Audio Zone Levels menu to access.