JING JIE UniPBX-2000, Административное руководство

Страница: 86 / 219

86
Parameter
Name
Description
need to be set to enable. The web password can only
allow digits (0-9), since it will be used for "outgoing call
privilege access" as a password.
Belonged Office An extension should be only belong to a office. Please
select the office here.
Belonged Division An extension can belong to a charged division which is
used to manage and billing purpose.
Secondary PSTN
Number When an extension has set the PSTN number, the system
will try to match it for a incoming call. If the called number
was matched, the call will derived to the matched
extension. And for outgoing call to a non-extension target,
the caller ID will be changed to this PSTN number.
SIP Security The level of SIP security. When set to register/invite, it
means the extension will be authenticated for register and
call. For set to "Register Only", the extension will only be
authenticated for register request. The default value is
"Register/Invite".
RADIUS Call
Authorization Whether to enable the RADIUS call authorization or not.
Please only enable it when you have a RADIUS server
connected and set the corresponding parameters in
"SYSTEM-> RADIUS". The default value is "No".
Outgoing Call
Screening Group The group ID of outgoing call screening.
Abbreviated Dialing
Group The group ID of abbreviated dialing.
Emergency Call
Group The group ID of emergency call.
Block Caller ID Whether to enable caller ID sending (CLIP) or not (CLIR).
The default value is "No".
Extension Type The type of the extension. The following is the guide line for
the settings:
ATA/Phone: It is used normally for IP phone or FXS/ATA
gateway.
FXO/Trunk/Proxy: It is normally be used for gateway such
as FXO/E1 gateway or SIP proxy.