JING JIE UniPBX-2000, Административное руководство

Страница: 43 / 219

Using the System
43
Parameter Name Description
RADIUS Enable RADIUS authorization and accounting or not.
Administrator need also turn on RADIUS call
authorization from extension in order to let system
send the RADIUS authorization to RADIUS server
when the extension calling. The default value is
disabled.
RADIUS Server RADIUS Server to be used for sending authorization
and accounting message.
RADIUS Server
Authorization Service Port The UDP port of RADIUS Server to receive the
RADIUS authorization request. The default value is
1812.
RADIUS Server
Accounting Service Port The UDP port of RADIUS Server to receive the
RADIUS accounting request. The default value is
1813.
Local RADIUS Binding
Port The local binding port for RAIDUS server. The default
value is 1812.
RADIUS Vender ID The RADIUS vender attribute . The default value is 9
(CISCO).
Shared Secret Key The share secret to be used in between RADIUS
server and system.
RADIUS Server Response
Time out (sec) The time in seconds to wait the response from
RADIUS server when send out a RADIUS request.
The default value is 10 seconds.
Inter-Extension Call
Authorization If it is set to "No", the system will not send out a
RADIUS authorization when a extension calls to
another extension. The default value is "No".
RADIUS Billing Enable to send RADIUS billing out to server or not.
The default is "Disable".
Send Unconnected Call Whether to send a RADIUS accounting message for
a unconnected call or not. The default is "Yes".
Inter-Extension Call Billing Whether to send a RADIUS accounting message
When a extension calls to another extension. The
default is "No".
RADIUS Start Billing If it is set to "No", the system will not send out the
RADIUS billing start when a call is connected. Only
RADIUS billing stop will be send after the call is
disconnected. The default value is "No".