Jet JWS-34KX, Руководство по эксплуатации

Страница: 6 / 44

Connection and repair work on the electrical installation may
be carried out by a qualified electrician only.
Do not stand on the machine.
Have a damaged or worn power cord replaced immediately.
Make all machine adjustments or maintenance with the
machine unplugged from the power source.
3.3 Remaining hazards
When using the machine according to regulations some
remaining hazards may still exist.
Touching the cutting tool in the machining area can cause
injury. For effective protection the shaper guard must always
be adapted to the workpiece and to the machining operation.
Risk of kickback. The workpiece is caught by the rotating
cutter and thrown back to the operator.
Thrown workpiece parts can lead to injury.
Sawdust and noise can be health hazards.
Be sure to wear personal protection gear such as safety
goggles and ear protection. Use a suitable dust exhaust
system.
The use of incorrect mains supply or a damaged power cord
can lead to injuries caused by electricity.
4. Machine specifications
4.1 Machine description
Fig 1
A Shaper guard lock
B Shaper fence
C Fence boards
D Mitre gauge
E Spindle rotation lock
F Spindle up/down lock
G Speed select viewing window
H Motor/pulley access door
I Spindle up/down scale
J Spindle up/down handwheel
K ON/OFF main switch
L Shaper guard, lateral hold down
M Shaper guard, vertical hold down
Fig 2
N Fence attachment knobs
O Fence board offset scale
P Fence board lock
Q Fence board offset lock
R Fence board offset adjust knob
S Dust port
T Fence cover lock knob
4.2 Technical data
No-load spindle speed n
o
1700/3500/6000/8000 rpm
Table size 635 x 600 mm
Table height above floor 850mm
Spindle diameter 30mm
Clamped height 70mm
Spindle travel 80mm
Router bit collet size 8 and12mm
Table opening diameter 160mm
Max. tool diameter 180mm
Max. tool height above table 120mm
dust port diameter 100mm
Dimemsions LxWxH 920x680x1090mm
Net weight 156 kg