Jet JWS-34KX, Руководство по эксплуатации

Страница: 16 / 44

*Too heavy a cut-
make several passes.
*knives cutting against grain-
turn workpiece around.
*Workpiece inhomogeneous.
*Moisture content too high.
Snipe
*Inadequate fence board adjustment- use spacer board where
possible.
*Clearance to table hole too big-
use table insert rings.
*insufficient workpiece guiding-
improve hold downs setting.
Spindle quill difficult to adjust
*Lack of lubrication-
lubricate spindle quill
*Quill is clamped.
Poor machining power
*belt is slipping-
tighten belt.
*Resin build up on tables-
clean and wax table surfaces.
10. Environmental protection
Protect the environment.
Your appliance contains valuable materials which can be
recovered or recycled. Please leave it at a specialized
institution.
This symbol indicates separate collection for electrical and
electronic equipment required under the WEEE Directive
(Directive 2012/19/EC) and is effective only within the
European Union.
11. Available accessories
Stock number 10000251
30mm spindle arbour incl. spacing collars.
Stock number 10000252
Sanding spindle with drums and sanding sleeves dia. 25, 38,
50, 75, 100mm
-refer to the Jet-Pricelist for various grit sanding sleeves (see
JVOS-10 and JOSS-10).
Stock number 10000253
Tenoning carriage
Stock number 709207
Foldable roller stand
12. Safe operation
See appendix A (on the last pages of this operating manual).
A.1 : Machining of boards
A.2 : Longitudinal machining
A.3 : Face machining
A.4 : Recess machining.
A.5 : Contour machining