JESS WELDING conMIG 300, Руководство по эксплуатации

Страница: 45 / 56

EN - 16
BA-0001 • 2020-12-01
9 Material table conMIG 300
Deleting jobs/resetting the control system to the factory settings (MC 3)
The control system has two separate options:
• 1. Delete all jobs saved by the user (display: ‘rES 1 – Job’) or
• 2. Reset the entire control system to the factory settings (display: ‘rES 2 – ALL’).
To use these options, press and hold the Fx button until EC 1 appears on the display. Now tap the Fx button
several times until ‘rES 1 – Job’ appears on the display. Turn the left-hand knob to select either rES 1 or rES 2.
Press and hold the ‘gas test’ button until ‘clr’ disappears from the right-hand display. The procedure is now
complete.
Note: after performing the reset ‘ALL’, all parameters must be checked to ensure they are correctly set for the
machine type!
Gas test (MC 3 – MC 5)
To open the gas valve, press the ‘gas test’ operating button for more than 1 second. The gas valve is then
opened for 20 seconds, after which it closes automatically. You can also close it sooner by pressing the
operating button again during this 20-second period.
Wire feed
In normal mode (not in job mode!), you can feed the wire in by pressing the ‘wire feed’ operating button.
The feed continues for as long as the button is held down. You can adjust the feed speed by turning the
left
- hand knob.
9 Material table
Tab. 4 The following materials are programmed in the control system by default
Material Display MC Gas Display MC Diameter (mm)
Steel St Argon 82%, CO
2
18% – MIX 18 Ar82 0.8
Steel St Argon 82%, CO
2
18% – MIX 18 Ar82 1.0
Steel St Argon 82%, CO
2
18% – MIX 18 Ar82 1.2
Steel St Argon 90%, CO
2
5%, O
2
5% Ar90 0.8
Steel St Argon 90%, CO
2
5%, O
2
5% Ar90 1.0
Steel St Argon 90%, CO
2
5%, O
2
5% Ar90 1.2
Steel St CO
2
CO
2
0.8
Steel St CO
2
CO
2
1.0
Steel St CO
2
CO
2
1.2
CrNi 4316 – ER308 4316 Argon 98%, CO
2
2% – MIX 2 Ar98 0.8
CrNi 4316 – ER308 4316 Argon 98%, CO
2
2% – MIX 2 Ar98 1.0
CrNi 4316 – ER308 4316 Argon 98%, CO
2
2% – MIX 2 Ar98 1.2
CrNi 4576 4576 Argon 98%, CO
2
2% – MIX 2 Ar98 0.8
CrNi 4576 4576 Argon 98%, CO
2
2% – MIX 2 Ar98 1.0
CrNi 4576 4576 Argon 98%, CO
2
2% – MIX 2 Ar98 1.2
ALMG 5 ALnG Argon 100% (Ar) Ar 1.0
ALMG 5 ALnG Argon 100% (Ar) Ar 1.2
ALSi 5 ALSi Argon 100% (Ar) Ar 1.0
ALSi 5 ALSi Argon 100% (Ar) Ar 1.2
CuSi CuSi Argon 100% (Ar) Ar 0.8
CuSi CuSi Argon 100% (Ar) Ar 1.0