Jepson 9435 T3, Руководство по эксплуатации

Страница: 8 / 124

Use of an earth leakage circuit breaker reduces the
risk of electric shock.
Personal Safety
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence
of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid
safety shoes, hardhat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Avoid accidental starting. Be sure switch is off-po-
sition before connecting to power source, picking
up or carrying the tool. Carrying tools with your
finger on the switch or plugging in tools that have
the switch on invites accidents
Remove any adjusting key or wrenches before
turning the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
Do not overreach. Keep a proper footing and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
Tool use and care
Do not force the tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
Do not use tool if switch does not turn it on and off.
Any tool that cannot be controlled with the switch
is dangerous and must be repaired.
Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and do not
allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Tools
are dangerous in the hands of untrained users.
Maintain tools with care. Keep cutting tools sharp
and clean. Properly maintained tools, with sharp
cutting edges are less likely to bind and are easier
to control.
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tools operation. If damaged, have the
tool serviced before using. Poorly maintained tools
cause many accidents.
Use the power tool, accessories and blades etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
Use clamps or other practical way to secure and
support the work piece to a stable platform. Holding
the work by hand against your body is unstable and
may lead to loss of control.
Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one tool may become hazardous
when used on another tool.
Service
Only qualified repair personnel must perform
tool service. Service or maintenance performed
by unqualified personnel could result in a risk of
injury.
When servicing tool, use only identical
replacement parts. Follow instructions in
the maintenance section of this manual. Use
of unauthorized parts or failure to follow
maintenance Instructions may create a risk of
electric shock or injury.
7.3. ADDITIONAL SAFETY PRECAUTIONS
FOR THE PSDC9435 | PDC9430 | DMC9410ND
Do not use the appliance in presence of flammable
solids, liquids or gases. Sparks from the armature
assembly or the brushes can cause a fire or
explosion.
WARNING! Risk of injury from hot chips.
Never touch the blade while the
GENERAL
8