Jepson 9435 T3, Руководство по эксплуатации

Страница: 15 / 124

EN
DE
FR
NL
ES
PT
PL
IT
14. MAINTENANCE AND REPAIR
14.1. CLEANING OF THE MACHINE
Blow periodically from all vents with dry
compressed air. All plastic parts should be cleaned
with a soft damp cloth. NEVER use solvents to clean
plastic. They could possibly dissolve or otherwise
damage the material. Wear safety glasses while
using compressed air.
14.2. LUBRICATION
Choose to replace the gear grease every 100 hours
by a qualified service technician.
14.3. REPLACING CARBON BRUSHES:
Replace carbon brushes when they wear down
to about 1/4 “(6mm) or sparking will occur. Both
brushes should be replaced at the same time.
Remove the brush holder caps
with a screwdriver.
Pull out the worn brushes, replace
with the new brushes and secure
the brush holder caps.
To maintain product safety and Reliability, repairs,
any other maintenance or adjustment should be
performed by Authorized Service centers, always
use original Jepson replacement parts.
15. STANDARD ACCESSORIES
• 60 T saw blade for unalloyed steel (600598)
• “K” clamping system for pipes (600653)
Optional accessories:
• 60 T saw blade for unalloyed steel (600598)
• 66T saw blade for stainless steel (600654NSF)
• 66T saw blade for thin steel(600654)
• 80T saw blade for aluminum (600655A)
• 66T IMPACT RESISTANT saw blade for gratings
and thin steel (72225566)
• Mounting stand (600599)
• “K” clamping system for pipes (600653)
16. RECOMMENDATIONS
FOR OPTIMIZED SAW BLADE
PERFORMANCE
1. Check that the workpiece is firmly fixed.
2. First check by hand, if the workpiece is fixed
and stable. Clamp and cut tubes and round
material only individually.
3. Second introduce at the beginning saw blade
carefully and gently into the material and
continue rapid with sawing.
4. Chips, which are deposited during the work
between the carbide teeth, remove carefully
before further work.
5. Please check the carbide tipped saw blade
regularly for wear and teeth chipping. Replace
the saw blade in case of wear or chipping by
a new one.
6. Always wear safety glasses during work.
7. Never reach with hands in the running saw.
8. Keep attention that clothes away.
9. Keep Attention by the blade assembly on the
direction of rotation.
10. Resharpen the saw blades always by profes-
sional resharpening services
11. Saw blades can be sharpened on average 5
times
DMC 9410ND
15