Jepson 9435 T3, Руководство по эксплуатации

Страница: 16 / 124

GENERAL
17. QUOTATION
When returning a defective machine for repair with
cost estimate. We charge a handling fee of 50€, but
does not apply if a repair order or purchase of a new
machine is given.
18. SPARE PARTS
For current spare parts list with order numbers
please visit our website:
www.drycutter.com
19. WARRANTY
The warranty time (warranty according to the
commercial code) is 12 months from the day of sale
to the end consumer.
It covers and is limited to the free replacement
of the defective parts or the free repair of defects
that are demonstrably due to the use of imperfect
materials during production or due to assembly
errors.
Incorrect use or start-up and unauthorized instal-
lations or repairs not specified in the operating
instructions void the warranty. Parts that are subject
to wear are also excluded from the warranty. We
expressly reserve the right to make decisions on
the warranty application. The warranty is void if
the device is opened by a third party. Transport
damages, maintenance work as well as damage and
malfunctions due to insufficient maintenance are
not covered by the warranty.
For warranty claims, the proof of purchase of the
device must be given by presenting the delivery
note, bill, or cash receipt.
As far as it is legal, we assume no liability for any
personal, material or consequential damages, in
particular if the device is used differently than for
the purpose indicated in the operating instructions,
not installed or repaired according to the opera-
ting instructions, or repairs were executed by a
layperson.
We reserve the right to perform repairs or
maintenance over and above the ones specified in
these operating instructions at the factory.
The warranty excludes wear parts such as:
Switches, flanges, carbon brushes, supportings
and Cutting tools (saw blades, carbide inserts,
drills and abrasive).
The quality and safety of the JEPSON circular
cold saw depends on the exclusive use of original
JEPSON saw blades. The use of other saw blades
may damage the machines.
The original JEPSON saw blade fulfils all
requirements of the TÜV examination (several
inspection offices) and is therefore certified by
these inspection offices. In case of use of saw blades
of foreign makes, the manufacturer assumes no
liability.
Exclusion of the JEPSON POWER warranty
The warranty excludes:
• Parts that are subject to wear through use or
natural wear and tear, as well as tool defects due
to wear and tear due to normal conditions of use
or due to natural wear and tear.
• Tool failure due to non-compliance with the
instruction manual, unconventional use,
abnormal atmospheric conditions, improper
operating conditions, overload, or lack of service
or maintenance.
• Tool failure due to replacement parts or
additional parts that are not genuine Jepson
Power parts.
• Machines to which changes or additions have
been made.
• The minor differences from the intended use of
the device that are not material to the value and
suitability of the tool.
GENERAL
16