Depending upon where the jack stopped, the holes may not line up
with the side support bracket. You may physically have to move the
top cabinet left or right with your hand (OR) you may have to lower
a certain numbered jack in order to get the bolt through the hole.
Check Box When This Step is Complete
Lining up the holes
Check Box When This Step is Complete
Step # 7-Y-3
Lining up the holes
In some cases, you may need to use the remote control to raise or
lower different jacks to get the holes to align. Pay attention to the
numbers next to the jack and corresponding number on the remote.
WARNING
DO NOT PUT YOU FINGERS OR HAND BETWEEN THE
METAL SUPPORT BRACKET AND THE UPPER
CABINET WHILE ADJUSTING THE CABINET HEIGHT.
Step # 7-Y
Securing the side supports
Use a washer and nut to secure the side support to the BOTTOM of
the main cabinet.
NOTICE
USE THE BOLTS & WASHERS FROM THE SHIPPING
BRACKETS
Check Box When This Step is Complete
Step # 7-Y-2
INSTALLATION INSTRUCTIONS
Jennison Entertainment Technologies
Snow Down Service Manual
Page 38
