jeiko JKAL37BR, Руководство пользователя

Страница: 93 / 124

Press [*]and hold on for 3 seconds
Example: Set exit delay time as 89s
Example: Set entry delay time as 9s
Press[ ]and hold on for 3 seconds
*
Enter 3 digit number from 001-255, add 00 if lower than 10. Like, 9 enter as 09
Enter 3 digit number from 001-255, add 00 if lower than 10. Like, 9 enter as 09
Administrator password
ADMINISTRATOR
m enu
SYSTEM SETTING
*
6 7 8 9 #
4 2
Digita il ritardo di entrata
premi return per uscire
premi ENTER per salvare
0 0 9
Impostazione
memorizzate
ENTER
ENTER
ENTER
0
*
6 7 8 9
# 4
3
8 9
Digita il ritardo di uscita
premi return per uscire
premi ENTER per salvare
Impostazione
memorizzate
ENTER
ENTER
ENTER
4.6.3 Exit delay time setting :
When the system is going to be armed ,
the guide voice informs you and in the mean time the 10 seconds Beep
(duration programmed by the factory) to count down the delay time
of the activation of the motion sensors and magnetic contacts of the areas
selected for protection. During the countdown, no intrusion is detected,
this allows you to leave your home without causing unwanted alarm .
The external siren will confirm the sistem arm with
2 BEEP( if function is enable).
Exit delay is working on the delayed, perimeter , burglar <<Ritardata,
perimetrale, intrusione>> zones please refer to paragraph 4.8
4.6.2Entry delay time setting :
Getting into the house with the system
armed, the control panel give you a Bep warning lasting 10 seconds
(Factory-programmed time) to countdown the entry delay time;
, if the system will not be disarm before the delay expired , the alarm will
be activated.
Entry delay is working on the delayed <<Ritardata>> zones please refer
to paragraph 4.8
91