jeiko JKAL37BR, Руководство пользователя, Страница: 81 / 124

3.7 Alarm in case of telephone line cut or faulty
Exclusively with enable , if the control panel detects the cut or
failure of the telephone line, if the alarm is in away /home
status, immediately activates the siren.If the alarm is disarmed
the control panel give the warning regarding the telephone line
failure, Beepin for 30 seconds, activates the alarm siren and also
if the GSM dialer is enable it sends an SMS <<Problemi line
telefonica>> and makes a call to the stored phone numbers.
When the telephone line is back to normal, the GSM dialer
sends an SMS <<Linea telephone ripristinata>> .
The display shows the following information:
Direct commands
(available on DISARM Status only)
Disable telephone line trouble control----------------------- 747410#
Enable telephone line trouble control ----------------------- 747411#
Disable Siren during telephone line trouble event-------- -858512#
Enable siren during telephoneline trouble event ---------- 858513 #
3.8 Anti- tamper alarm function
3.8.1 When the control panel receives the tamper signal , the
control panel immediately activates the siren and the dialer to
call the Supervisory institute CMS and stored telephone
numbers. After resetting the sensor that has been attempting to
tamper, the same sensor will be 'ready for reporting other
tamper alarm.
The antitamper function is always enable, even when the
system is disarmed.
3.8.2 Tampering information on the LCD display .
The display shows the number of tampered zone
79
BASIC SETTING & OPERATION