jeiko JKAL37BR, Руководство пользователя

Страница: 105 / 124

5. ALARM & PROCEDURES
5.1 Report and zone information on the LCD display
The arm (TOTAL & PARTIAL) operation and the disarm of the
control panel controls only and exclusively on the burglar,
delayed and perimeter zones. All other types of zones are 24
hours activated.
5.2 Report to Supervisory Institute CMS
The panels adopt Contact ID for the communication protocol
to send the alarming information to the center. If the panel
receive the acknowledgement from center, then a successful
alarm, if not, the panel will alarm repeatly .Alarm information
can be displayed and resolved by the software of center
computer.
5.3 Alert report from control panel to user telephone
When the control panel receives an alarm signal from a delayed
zone, generates two tones sound "dee dee", and starts the
countdown of the delay time (indicated with the same tonebut
higher frequency). If thecontrol panel wiil not be turn off within
the preset time , the dialer starts routine calls to phone
numbers programmed, if the alarm signal received from one of
the areas types (intrusion, perimeter, emergency, fire,gas) the
activation of the siren and dialer are immediate. When the user
answer to the call made by the control panel hears the alarm
message recorded can and the he can operate the control panel
following the voice guide.
Allarme in casa del sig. HHHHH , p rego digitare
la password .
1
Premi 1 per inserire il sistema
Premi 2 per disinserire il sistema
Premi 3 per richedere lo stato
del sistema
Ascolto ambientale
Premi 0 per terminare
2
3
4
X X X X
enter the user password
0
#
ADMINISTRATOR
m enu
ALARM & PROCEDURES
103