Telephone Line
Voice guide
volume
2.3 Wiring
Make connections as shown in below.
Connect the telephone line cable and telephone jacks into the
dedicated sockets.
Insert the power jack into the DC socket and insert
the power supply into the socket on the wall.
To completely shut the control panel , after disconnecting
the AC / DC power supply , enter the user PIN , press and
hold the # key for 3 second; doing that the built-in
rechargeable battery will be disconnected until the next
connection to the AC/DC power.
2.4 Connecting Wireless Devices
2.4.1 SENSORS & DETECTORS
Before installing the sensors make sure the distance
between the control panel and the sensor is less than 50
meters and any obstacle in between , do not interfere with
the radio frequency transmission so that the
communication is stable and secure. Please test
and make sure the detectors can work with control panel
normally.
AC/DC power supply
Telephone
71
WIRING
Antenna GSM
Note:
in case of weak signal
please refer page 123
connect the
external GSM antenna
Содержание JKAL37BR
Страница 2: ......
