Jefftron Leviathan V3, Руководство по установке

Страница: 17 / 24

16
Change parameters page 3/3
External input:
Works with Input terminal - see manual at page 3.
- OFF:
Every signal to Input terminal is ignored.
- External trigger:
gun trigger is disabled and repla-
ced by micro switch connected to Input (SIG and GND)
- Burst-3 trigger: micro switch connected to Input
(SIG and GND) make 3 burst fi re when it is pressed
.
Gun trigger is still functional.
- AUG trigger: selector plate detection is disabled.
Gun trigger is set to selector on semi. Micro switch co-
nnected to Input (SIG, GND) is set to selector on auto.
- Empty mag (NO): Micro switch activates empty ma-
gazine detection, when is connected SIG with GND.
- Empty mag (NC):
Micro switch activates empty ma-
gazine detection, when is disconnected SIG with GND.
- Virtual reload: Micro switch activates virtual maga-
zine reload, when is connected SIG with GND.
Virtual magazine:
Value sets number of shots (70bb here). Gun will stop shooting when virtual mag. reach 0.
Near empty magazine - makes 2 short beeps after each shot before virtual mag. is empty.
Reload delay -
is time when gun can‘t shoot after empty mag. or it is triggered by „Virtual
reload“ (through input port - set as fi re mode or change selector position - there and back)
Save or Save as: You can save these parameters under custom name into your app.
FACTORY RESET: It restores parameters to factory state (password is unchanged).